Where To Place Carbon Monoxide Detectors In Your Trenton Property
Property owners must defend against various risks like burglary, flooding, and fire. But what about something that you are unable to see or smell? Carbon monoxide presents an uncommon challenge as you may never realize it’s there. Despite that, implementing CO detectors can simply protect your loved ones and property. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Trenton residence.
What Is Carbon Monoxide?
Known as the silent killer as of a result of its lack of odor, color, and taste, carbon monoxide is a readily found gas caused by the incomplete combustion of fuels. Any fuel-utilizing appliance like a furnace or fireplace may create carbon monoxide. Even though you normally won’t have problems, issues can crop up when equipment is not regularly inspected or properly vented. These mistakes can result in a build-up of this dangerous gas in your interior. Heating appliances and generators are the most frequent causes for CO poisoning.
When subjected to lower amounts of CO, you might notice headaches, dizziness, fatigue nausea, or vomiting. Prolonged exposure to high concentrations can cause cardiorespiratory arrest, coma, and death.
Recommendations On Where To Place Trenton Carbon Monoxide Detectors
If you don’t use a carbon monoxide detector in your home, get one today. Ideally, you should use one on each floor of your home, including basements. Here are a few recommendations on where to place carbon monoxide detectors in Trenton:
- Put them on each level, specifically in areas where you utilize fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
- Always install one no more than 10 feet away from bedrooms. If you only have one CO detector, this is where to put it.
- Place them at least 10 to 20 feet from sources of CO.
- Do not position them right above or beside fuel-burning appliances, as a non-threatening amount of carbon monoxide may be emitted when they start and trigger a false alarm.
- Fasten them to walls at least five feet from the floor so they can test air where people are breathing it.
- Avoid installing them in dead-air zones and near doors or windows.
- Put one in rooms above attached garages.
Inspect your CO detectors routinely and maintain them per manufacturer instructions. You will usually have to replace units every five to six years. You should also make sure any fuel-utilizing appliances are in in good working order and sufficiently vented.