Categories

System malfunctions and false alarms can be frustrating, and even worse, could prevent your home’s security from working the way it should. Fortunately, most issues, from false alarms to dead batteries, are easy to fix. Take a look at our suggestions for troubleshooting your home alarm system in Trenton. We’ll help keep your family protected and your system operating the way it should.

Test Your Home Security System In Trenton

One great way to troubleshoot your home’s security is to test it yourself! Newer systems have a test mode so you don’t by accident trigger an emergency response from monitoring agents. After moving to test mode, follow these steps:

• Arm your system as you normally would when you head out.
• Open a window or door that has a contact sensor, or try to trigger another device. Shut the window or door once you’re finished so it doesn’t trip the alarm as you leave test mode.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to produce an entry in the alarm activity log.
• Proceed to test equipment as you wish
• Inspect the alarm’s activity log to validate functionality.

Don’t worry, monitoring professionals can tell that your alarm system is involved in a test. Be sure to switch off test mode when done. It’s wise to test once a month or anytime you adjust your home’s phone or internet connectivity.

Evaluate The Positioning And Condition Of Motion Sensors

Although an crucial aspect of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with a few basic troubleshooting steps.

• Conduct a visual check. Is there anything that could move within the path of the sensor, like drapery caught in a breeze?
• Is the sensor covered in dust? Grime, dirt, and cobwebs can cause malfunctions. Make sure the face is clean.
• Does the motion detector offer pet immunity you can activate? Some models can be programmed to disregard pets up to 100 pounds.
• When was the battery changed? Low batteries can affect performance or result in false alarms.
• Is the sensor aimed toward a source of heat? Excessive heat from direct sun or a fireplace can trigger an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Notifications

One helpful benefit of new home security systems is that they’ll let you know when batteries are getting low. If your system uses a mobile app or control panel, you’ll typically discover alerts there. Depending on the alarm, you may notice an occasional beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that will have to be replaced every 1 to 2 years. It’s best to keep batteries around and establish a replacement schedule. Top systems also come with a backup battery for the main control panel. This battery keeps your system operating if your power goes out and should recharge itself once the electricity is working again. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Trenton 

As the leading name in home security, ADT designs systems that supply unrivaled functionality and convenience. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always get updates when a sensor battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Trenton home and family. Place a call to (609) 256-4469 or fill out our form today!